Double Head Stroke Sanders
The Double Head Stroke Sander can put a number of different finishes on flat metal surfaces. You can accomplish two steps of the metal finishing without changing belts. The stroke sander operates by utilizing an abrasive belt on a flat metal surface. Feed table on wheels send your part along the guide rails through the feed area. The drive wheel runs on a 3-phase, five HP motor. A tensioning wheel adjusts the tightness of the belt to reduce or increase the grinding action.
The Double Stroke Sander comes with a hand block to apply manual pressure on the belt and the work piece, else an optional contact wheel attachment can apply strong, steady pressure.
Model PMC-264-6-312-6 Double Head Stroke Sander
Machine Features:
- 5 H.P. T.E.F.C. motor, 1750 rpm
- Voltage: 220-440-550 / 3 / 60
- Pulleys: 10” dia. X 6.25” face
- Travelling bar included
- Table size: 30” wide X 120” long
- Two abrasive belts: 6” X 264" and 6" X 312" 4750 F.P.M.
- Magnetic starter with overload protection
- Belt guards
$11320.06
Available through The Industrial Supply Store
1-800-577-8825
Looks like one great piece of machinery. Was searching online for custom sheet metal parts when i stumbled upon this blog.
ReplyDeleteEric
Deletewe work very close to the metal fabrication and stainless steel houses.
we will help reduce your cost and increase the bottom line by new tools and different ways that is cost effective. Come back more often and take a look at what we have to offer
What is the difference between Cincinnati metal fabrication and other places I heard that they do it a special way that makes it better.
ReplyDeleteAaron, Cincinnati metal fabrication is done the same way as other metal fabrications, it's just in a different location.
ReplyDelete